VL series II TWIN 6KVA/6.2KVA

Dual outputs for smart load management

VL series II TWIN 6KVA/6.2KVA

VL series II TWIN is designed with zero transfer time which is perfect for critical devices such as servers and ATMs. It’s equipped with a powerful 120A solar charger and 120A AC charger. The detachable LCD control module allows users to monitor this inverter remotely. It can also expand power capacity to 54KW/55.8KW with 9 units in parallel operation. VL series II TWIN is occupied with two outputs. The second output can be scheduled on/off, setting cut-off voltage or SOC and discharging time via LCD setting.

Main Features

Dual outputs, for smart load management
Maximum PV input current increases to 27A
Zero (0ms) transfer time to protect mission-critical loads such as servers and ATMs
High PV input voltage range
Detachable LCD control module with multiple communications
Selectable high power charging current

Built-in Wi-Fi for mobile monitoring (App is available)
Configurable AC/Solar input priority via LCD setting
Reserved communication port for BMS (RS485 or CAN-BUS)
USB On-the-Go function
Parallel operation up to 9 units

Technical Specifications

MODEL	VL series II TWIN 6K	VL series II TWIN 6.2K
Rated Power	6000VA/6000W	6200VA/6200W
Parallel Capability	Up to 9 units
INPUT
Voltage	230 VAC
Voltage Range	110-280 VAC
Frequency Range	50 Hz/60 Hz (Auto sensing) ± 4Hz
Power Factor	≧ 0.98 @ Nominal Voltage (100% Load)
THDi	≦ 10%
OUTPUT
Frequency Range (Batt. Mode)	50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Waveform	Pure sine wave
Harmonic Distortion	≦3 % THD (Linear Load); ≦ 5 % THD (Non-linear Load)
Frequency Range (Synchronized Range)	46~54 Hz or 56~64 Hz
AC Voltage Regulation (Line&Batt. Mode)	230VAC ± 5%
Transfer Time (AC Mode to Batt. Mode)	0ms
Transfer Time (Inverter to Bypass)	4 ms (Typical)
EFFICIENCY
Battery Mode	92%
ECO Mode	98%
Line Mode	94%
BATTERY
Battery Voltage	40~66 VDC
Floating Charge Voltage	54 VDC
Overcharge Protection	66 VDC
PHYSICAL
Dimension, D X W X H (mm)	140 x 295 x 468
Net Weight (kgs)	12
Communication Port	USB/RS232/RS485/WI-FI/Dry-contact
OPERATING ENVIRONMENT
Operating Humidity	5% to 95% Relative Humidity(Non-condensing)
Operating Temperature	-10°C to 50°C
Storage Temperature	-15°C to 60°C
SOLAR INPUT
Solar Charger type	MPPT
Maximum PV Array Power	6000 W
MPPT Range @ Operating Voltage	120 ~ 430 VDC
Maximum PV Array Open Circuit Voltage	500 VDC
Maxmum Solar Charge Current	120A
Maximum AC Charge Current	120A

Invermax